Dry Ready Mix Plaster Machine

Inquiry Overview | Technical Parameters | Introduction | Working Principle | Features | Inquiry

The Zhengzhou Sincola SX30 Dry Ready-mix Plaster Machine is a continuously working mixing machine, designed for the application of any type pumpable dry ready-mixed mortar based on cement, gypsum and insulating mortar. In the construction machinery market, this type machine has been universally using with its reliability and stability in performance. The machine consists of portable units, permitting easy and comfortable transport due to their small and handy dimensions and low weights.Thanks to its efficiency, silence and technical perfection, SX30 Dry Ready-mix Plaster Machines the top-priority machine for dry ready-mixed mortar applications.

Dry-Ready-mix-Plaster-Machine

Dry-Ready-mix-Plaster-Machine

  • ModelSX30
    Rated Output30 L/min
    Rated Working Pressure3 MPa
    Total Power8.5 kW
    Main Electric Motor3Phase,380volt,5.5 kW
    Rev.of Rotor380 RPM
    Rated Air Output250 L/min
    Water Pump Rated Output700 L/h
    Max.Conveying Dist.50 m
    Hopper Capacity120 L
    Loading Height1000 mm
    Conveying Hose ID.25/32 mm
    Air Hose ID.13 mm
    Overall Dimension1240×680×1550 mm
    Weight280 kg
  • Introductions Of Dry Ready-mix Plaster Machine

    The Zhengzhou Sincola SX30 Dry Ready-mix Plaster Machine is a continuously working mixing machine, designed for the application of any type pumpable dry ready-mixed mortar based on cement, gypsum and insulating mortar. In the construction machinery market, this type machine has been universally using with its reliability and stability in performance. The machine consists of portable units, permitting easy and comfortable transport due to their small and handy dimensions and low weights.Thanks to its efficiency, silence and technical perfection, SX30 Dry Ready-mix Plaster Machineis the top-priority machine for dry ready-mixed mortar applications.

    Application Of Applications

    All pumpable dry ready-mixed mortars or materials, such as Cement mortars, Lime plasters, Gy-psum plasters, Masonry mortars, Insulating plasters , Self-leveling floor screeds, etc.

The dry materials is supplied in sacks and filled into the large hopper.the low height of the SX30 makes filling considerably easier.the materials is then transported by the agitator out of the hopper into the mixing pipe of the machine.the particular geometry of the agitator means the hopper can be emptied almost 100%.in the mixing area.the amount of water appropriate to the materials is supplied .depending on the mortar used.the amount of water can be separately regulated.the integrated water pump ensures the water pressure is always adequate.the mixing area is extremely large.this means the material is perfectly mixed and reaches the rotor/stator pump of the machine in an ideal condition .there it is then pumped at pressure through the mortar hose.the nozzle is connected in the end of mortar hose with compressed air.and then the mixed mortar is sprayed out evenly.the integrated mini compressor ensure the air pressure and consumption always adequate .as well as remote-control by air valve.attention for detail instruction .please follow the operation manual

  • Features Of Dry Ready-mix Plaster Machine

    1.The integrated machine with mixer, self-suck water pump, mini compressor and rotor/stator pump.
    2.The continuously mixing and pumping machine.
    3.Small and handy dimension and low weight, quickly and easily transport even in the most confined spaces.
    4.The rotor/stator pump ensures the material is pumped and sprayed out continuously and evenly.
    5.The machine always works with efficiency and silence.
    6.With air valve remote-control function.
    7.The machine consists of portable units, permitting easy to operate and take maintenance and easy to use in any circumstance.