SX55 Spraying Pump is a new machine widely applied in plastering and almost all the construction projects for materials such as traditional mortar mixed on site, normal mortar, insulation mortar etc.
Model SX55 Pumping motor 5.5KW +2.2kw-380V Pump core L1 Allowed max. Aggregate diameter 6mm Material theoretical output 20 - 40 l/min Conveying pressure 25 - 40 Bar Feeding height 125 cm Mixer capacity 120L Dimension 230X80X130 cm Weight 380kg
Introductions Of Dry Ready-mix Plaster Machine
SX55 Spraying Pump is a new machine widely applied in plastering and almost all the construction projects for materials such as traditional mortar mixed on site, normal mortar, insulation mortar etc. This machine could save much time, manpower and improve efficiency. It has advantages of easy operation, high reliability even spraying mortar and not easy to fall down. L1 and L2 pump cores are small and light enough to be moved easily for working convenience on site. Besides, the simple structure makes cleaning jobs fast and easy and does not require any special working condition. So it is your best choice for mixing, conveying and spraying all kinds of mortar in construction projects.
Application Of Applications
All pumpable dry ready-mixed mortars or materials, such as Cement mortars, Lime plasters, Gy-psum plasters, Masonry mortars, Insulating plasters , Self-leveling floor screeds, etc.
Working Principle of Dry Ready-mix Plaster Machine
The dry materials is supplied in sacks and filled into the large hopper.the low height of the N5 makes filling considerably easier.the materials is then transported by the agitator out of the hopper into the mixing pipe of the machine.the particular geometry of the agitator means the hopper can be emptied almost 100%.in the mixing area.the amount of water appropriate to the materials is supplied .depending on the mortar used.the amount of water can be separately regulated.the integrated water pump ensures the water pressure is always adequate.the mixing area is extremely large.this means the material is perfectly mixed and reaches the rotor/stator pump of the machine in an ideal condition .there it is then pumped at pressure through the mortar hose.the nozzle is connected in the end of mortar hose with compressed air.and then the mixed mortar is sprayed out evenly.the integrated mini compressor ensure the air pressure and consumption always adequate .as well as remote-control by air valve.attention for detail instruction .please follow the operation manual
Features Of Dry Ready-mix Plaster Machine
1.The integrated machine with mixer, self-suck water pump, mini compressor and rotor/stator pump.
2.The continuously mixing and pumping machine.
3.Small and handy dimension and low weight, quickly and easily transport even in the most confined spaces.
4.The rotor/stator pump ensures the material is pumped and sprayed out continuously and evenly.
5.The machine always works with efficiency and silence.
6.With air valve remote-control function.
7.The machine consists of portable units, permitting easy to operate and take maintenance and easy to use in any circumstance.